mallet e pedals are a popular choice for mountain bikers, offering a durable and reliable platform for tackling tough terrain. However, to get the most out of your mallet e pedals, proper installation and adjustment are key. In this article, we will guide you through the process of installing and adjusting mallet e pedals for optimal performance.
Step 1: Gather the necessary tools
Before you start, make sure you have all the tools you need. You will need a pedal wrench, grease, and a torque wrench. It’s important to use a pedal wrench as regular wrenches may damage the pedals.
Step 2: Prepare the pedals and crank arms
Before installing the mallet e pedals, make sure the crank arms and pedal threads are clean and free of any debris. You can use a rag to wipe them down or a small brush to remove any dirt or grime.
Step 3: Grease the pedal threads
To ensure smooth installation and prevent the pedals from seizing, it’s important to apply a small amount of grease on the pedal threads. This will also make it easier to remove the pedals in the future.
Step 4: Install the pedals
With the pedal wrench, turn the pedals clockwise into the crank arms. Make sure they are tightened securely, but not too tight as this may cause damage.
Step 5: Adjust the release tension
mallet e pedals come with an adjustable release tension feature that allows you to customize the amount of force needed to disengage from the pedals. This is important for maintaining control and avoiding accidental release while riding.
Use the 3mm Allen key to adjust the release tension by turning the tension screw. For a tighter hold, turn the screw clockwise. For a looser hold, turn it counterclockwise. Test the tension by clipping in and out of the pedals a few times until you find the desired amount of tension.
Step 6: Adjust the float
Float refers to the amount of lateral movement the pedals allow for your feet. For riders with knee or hip issues, adjusting the float can help alleviate stress on those joints.
With the 3mm Allen key, loosen the float adjustment bolt on the pedal until it moves freely. Place your shoe in the cleat and align it in the desired position. Then, tighten the float adjustment bolt until it is snug. Test the float by clipping in and out of the pedals a few times to ensure it is comfortable and secure.
Step 7: Set the release angle
Release angle refers to the direction your foot will release from the pedal. For most riders, the natural angle of release is 15-20 degrees. However, this can be adjusted according to personal preference.
To adjust the release angle, use the 3mm Allen key to loosen the release angle adjustment bolt on the pedal. Move the cleat in the desired direction and tighten the bolt until it is secure. Test the release angle by clipping in and out of the pedals a few times to ensure it is comfortable and safe.
Step 8: Check the torque settings
To ensure the pedals are properly installed and will not loosen during use, it’s important to check the torque settings. The recommended torque for mallet e pedals is 35-40 Nm.
Using the torque wrench, check the torque on both pedals. If it is too high, you may damage the pedals. If it is too low, the pedals may loosen during use. Adjust accordingly until the proper torque is achieved.
Step 9: Test and make final adjustments
Once you have installed and adjusted the mallet e pedals, take your bike for a test ride. Pay attention to how the pedals feel and make any final adjustments if needed. Experiment with different release tensions, float, and release angles until you find the perfect setting for your riding style.
In conclusion, installing and adjusting mallet e pedals for optimal performance is essential for a smooth, comfortable, and safe ride. By following these steps and making sure all settings are properly adjusted, you can get the most out of your mallet e pedals. So get out there and conquer the trails with confidence!